Monthly Archives: September, 2015

Steam Shop Tour Success!

A great big thank you to all who joined us for the Steam Shop Tour during RailFest weekend! It was such a great success, with many out of state guests joining us along with locals, whose excitement was only fueled by the chance to see the progress.

  

#1702 was on full display along with, the steam shop, #777 diesel engine, and if you notice, a small replica engine that we repainted and displayed just in time! This little green guy will be placed in Bryson City beside our historic depot and will be a great photo op!

Here are a few fantastic captures of the engine. Photographer Charles Hardin was kind enough to share these great images. Enjoy!

The shop guys were happy to host everyone for the afternoon, and really enthused by all the questions everyone had. After a nice holiday weekend they were back at it! The biggest project has been fitting the interior sheets in the boiler. All but one sheet has been placed inside and the contractors have been working to get them set. A door sheet had to be removed so it could be realigned.

    

New bolts for the steam pipe on both sides have been installed!

Joe has been working on the lathe making some much needed tools. All the belly brace bolts are completed, and he just finished up on a new welding fixture for the flexible staybolt sleeves.

Turntable set in Bryson City!

After months of hard work we are happy to say that the turntable has been set. Although this doesn’t complete the entire project this is a major advancement! Enjoy some photos from today’s setting.

Project Manager, Tom Falicon was able to push the very first full rotation of the table!

In addition to our exciting Steam Shop Tour taking place during the RailFest celebration, the turntable will be open for viewing and photos. Tom Falicon will be present to answer questions! Visit the turntable site behind the GSMR parking lot on Saturday Sept. 5,  9-10AM & 3:30 – 4PM!

The steam shop has been busy with the latest rounds of sheet work.

They are fitting, reforming, trimming and reaming the side sheets. A few of the sheets have been placed inside the boiler so that they can be properly marked and grounded for the best fit. A new contractor, Gary, has been working alongside the team for the past few weeks.

Joe has been busy on the engine lathe making new belly brace bolts.

Brian and Marshal were also able to craft some formers for the boiler plate.

There are still tickets available for the Steam Shop Tour and the guys are looking forward to showing everyone around! If you haven’t made your reservation you should. This will be the first ever specialty Steam Shop Tour hosted during RailFest, we’d like for all of our steam patrons to join us if you can!